Why You Should Use Ipe Wood For Fence?

Best Ipe Prices

When considering Ipe wood for fence you should understand that there are different levels of strength. There is no need to try to get a very strong fence if you do not have the money to do so.

It is also good to note that you will have to add railing on the outside of your fence to protect the outside from damage from your pets and children. Ipe wood decking images Remember that in places with hard ground the joists and joins may be in place to support your fence for several years. In these cases you should add a base to your fence that supports it as well.

At a minimum, you want to ensure that you have properly braced your fence to prevent accidents like falling branches or falling nails. If your fence is old and cracked or damaged, it is very important to get the areas repaired as soon as possible. This will save you a lot of money and make your job a whole lot easier in the future.

It is quite easy to forget that the base can be injured when installing it incorrectly level or that you should put the first plank down on a proper level to allow the joists to hang straight. This might not seem important but it does. After you do all the basic work you will want to add posts that will hold the joists in place.

In addition to not trying to cut too much off the cost of the project you want to make sure that the piece of wood you choose for the fence is the right size. You do not want to waste your time and money on a piece of wood that is too large or too small. If you choose Ipe wood for fence you should be able to cut it yourself, but it is much better to get it cut by a professional and let them do the cutting.

Wood should never be allowed to expand more than the thickness of the planks. If it expands beyond this limit the wood can warp, buckle and even crack. This is far worse than any other problems and can result in a horrible disaster if the wood expands beyond the dimensions.

The proper care for Ipe wood for fence is similar to any other type of wood you choose for your project. You should have all the tools ready to go before you start.

There are a few things that you will need to consider if you do not already have good quality woodworking supplies. Having a screw gun will help to give you some leverage when drilling out joints when the joints are dry.

When you put a nail in the wood, you need to have a secure backing board on the side of the wood. If you don’t have this the wood is going to warp and split as a result. It is easier to use a board on the other side of the joint, but a board can be dangerous if it is not on a tongue and groove.

The tongue and groove are the edge that makes the nail stand up against the wood. It is going to slip right through it if you don’t keep the peace secure.

You should also do whatever you can to not glue the pieces together. The reason for this is you can get these kinds of joints to expand and it is much better to be safe than sorry. You can do this by ensuring that the wood moves freely but do not let it move too far forward or back.

It is much easier to make your decisions about Ipe wood for fence by understanding the conditions under which the wood was harvested. There are certain conditions that you need to consider when you are choosing Ipe wood for fence because the species is extremely sensitive to environmental conditions. Knowing these will help you select the right material for your project.